Along with upgraded Ambarella CPU, F200 PRO provides FHD resolution on both front & rear cam, Super Night Vision and Time Lapse during Parking mode to fully surveil the vehicle and Safety Warning System to ensure your safe drive.

Thinkware Dash Cam Link App

The F200 PRO’s built-in Wi-Fi allows it to connect to the Dash Cam Link App, letting you easily view, download, delete or share footage directly from your smartphone.

Thinkware Dash Cam Link provides easy access to your Thinkware Dash Cam. Share the best driving videos on social media by simply downloading your dashcam footage into your smartphone’s photo album. Replay your latest driving videos and manage your dash cam’s settings all in one app.

Parking Surveillance Mode

Prevent Vehicle Battery Drain
State-of-the-art parking mode monitoring system via the G sensor. The dash cam continuously monitors the health and status of the vehicle battery and will shut down if it detects any issues*

*Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality

Motion Detection
Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection
Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

Time Lapse Parking Mode

Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.

Energy Saving Mode

Reduce power consumption and provides longer video recording than normal parking mode. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.

Super Night Vision

Whilst in parking mode the Thinkware camera uses advancements in lens and computing power to revolutionise night time recording with their Trademarked Super Night Vision.

The system uses ISP (Image Signal Processing) technology and real-time image processing to capture far greater detail at night, further protecting your vehicle whilst parked.

Safety Camera Alert
Get audio warnings from your cash cam when approaching a wide variety of road safety cameras*.
Thinkware Dash Cams provides active alert for these 5 types of road safety cameras while still recording videos.

*UK speed camera (Cyclops) database with regular free updates

Red light warning system
Speed camera warning system
Red light & speed camera warning system
Average speed warning system
Mobile zone warning system

Advanced Driver Assistance System (ADAS)

Forward collision warning system (FCWS/ UFCWS) - Warns the driver of impending road hazards.

Front vehicle departure warning (FVDW) - Informs the driver of the vehicle ahead starting to move.

Lane departure warning system (LDWS) - Detects if the vehicle is veering off the driving lan

GPS Mapping

With GPS, all Thinkware dash cams can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area. The PC/Mac viewer can then provide you with the vehicle speed and the time of a collision, and the severity of any impacts.

PC / Mac Viewer

The intuitive and simple-to-use interface of Thinkware Dash Cam allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.

Hight Definition Video Quality

CMOS Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.

The 140° wide-angle lens view will minimise blind spots to assure recording of all events without fail.

Add a rear camera to capture Full HD 1080p footage with a 160° wide-angle lens.

Wide Dynamic Range

Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.

Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.

Multiple Recoding Modes

Continuos recording mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident recording mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual recording mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

Fail-safe recording
In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

Format Free Technology

Avoid corrupt memory cards and the slow process of having to reformat your SD Cards with the free flowing recording system.

One of the most common issues with a Dash cam’s reliability is the SD card, these cards are continuously overwritten and often become corrupt if not formatted often. This normally means that you have to remove the SD card and put it into a computer to reformat it. Thinkware have overcome this vulnerability by making the dash cam pre-allocate the memory, avoiding the need to format the SD card on a regular basis and making the footage easily viewable on our Thinkware viewer software.

High-Temperature Protection System
Protects your dashboard camera from overheating and causing potentially irreversible damage to it or its data.

The specially designed heat discharge construction and the built-in thermal sensor of the dash cam protects the device and its data against intense heat by automatically turning it off to prevent overheating. All Thinkware cameras use a Super Capacitor, designed with Temperature Protection, for an emergency power source in the event of a crash or sudden power loss, allowing the unit to save the last 10 seconds of an incident.

Mux Box
Need even more from your camera?

Add the optional Mux Box to allow up to 4 additional cameras be added to your front facing dash cam instead of one rear unit.

Simply connect the Mux box to the Rear camera feed and then add your choice of side cams, rear external, rear internal or internal infrared cameras.

The perfect solution for passenger cars, light commercial vehicles and HGVs.

Specifications

Camera: CMOS 2.0M
Resolution: Front: Full HD (1920 x 1080P) Rear: Full HD (1920 x 1080P)
Viewing Angle: Front: 140º (Diagonal), Rear(Optional): 160º (Diagonal)
Capacity: Micro SD Card 8GB class10, 16GB/32GB/64GB/128GB UHS-1
Recording Modes: Continuous Recording, Incident Recording, Manual Recording, Parking Recording(Motion detection, Time lapse, Energy saving)
Sensor: 3-Axis Accelerometer G-Sensor (3D, ±3G)
GPS: External GPS (Optional)
Wi-Fi: Built-In Wi-Fi
Power: DC 12 / 24V supported
ETC: Status LED, Wi-Fi LED

What's in the box

Main dash cam unit
Mount with 3M tape
Hardwiring cable
Adhesive cable holder (3ea)
MicroSD memory card with adapter (consumable)
Quick Start Guide/Warranty Card

thinkware dash cam

Thinkware Dash Cam F70 PRO

Thinkware Dash Cam F790

RADAR – Extended Parking Mode

Thinkware Dash Cam Q1000

Thinkware Dash Cam F200 Pro